Please Note: All preventative maintenance inspection fees listed below do not include service charges.

Wheel Alignment Inspection Program

• Inspect all heads and clean inspect all cables and clean
• Check operating system and software integrity
• Check all heads on calibration bar perform calibration if needed
• Check castor sweep and observe test alignment
• Check turn plates and adjust if needed

Bi Annually: $699.00

Brake Lathe Equipment:

• Inspect all moving parts
• Clean out metal shavings
• Change oil
• Inspect belt
• Check on/off switch
• Check power cord
• Check arbor and cones
• Check rotor cutting attachment

Bi Annually: $299

Inspect shaft threads for wear

• inspect all cones for wear
• check wing nut for proper operation (quick connect if applies)
• check all electronics
• check motor amperes
• check belt if applies
• check fan motor if applies
• check touch pad if applies
• check calibration accuracy

Yearly: $99.95

Tire Changer Equipment

• inspect all hoses
• inspect oil/water separator
• check complete system operation
• clean entire machine
• add air tool oil, if needed, and adjust
• check bead blast
• check bead breaker assembly
• check turntable reversing switch
• check motor amperes
• check bead break tools
• check air motor if applicable
• check air fill chuck
• check gauges

Bi Annually: $499